Ion Technologies 30ACi Deluxe Sump Pump Battery Backup System (MET20274)

Package Includes:

• 1, 30ACi inverter with single battery box
• 2, WC33 sump pumps
• 1, Ion Genesis sump pump controller with sensors

Features:

• Fully automatic auxiliary power source
• Backup system runs on AC or DC power
• Runs the same ⅓ HP pump with utility power on or off
• Ion Genesis® controller monitors all pump activity
• Full digital display on inverter and controller
• Ion® digital level sensors have no moving parts

Brochure
Operations Manual

30ACi Inverter Specifications:

• Mains A.C. Lower Voltage Limit 90 VAC ± 5V
• Output Voltage with Full Load 110 - 120V ± 10 V
• Maximum Output Power 4.0 FLA
• Battery Lower Voltage Limit 10.5 VDC ± 0.2 V
• Output Frequency
• Main Output Frequency Same as Input
• DC Input 12 VDC
• Battery Charger Boost Voltage 13.7 ± 0.2 V
• Overload 130% ± 3% (With Auto Reset Function)
• 3-year warranty

WC33 Sump Pump Specifications:

• Maximum Capacity Up to 45 GPM
• Maximum Head Up to 24’
• Electrical Data 115 V, 1 Ø, 4 FLA, 60 Hz
• Motor Data 1/3 HP, 3450 RPM
• Recommended Minimum Basin Size 18” x 24”
• Materials of Construction: Cast iron & engineered thermoplastic
• Power Cord 10’ 
• Discharge 1½” NPT
• Solids ½”
• 3-year warranty

Ion Genesis Sump Pump Controller:

Features:

• Programmable sump pump controller keeps user in control of all operations
• Ion digital sump pump switch communicates with the Ion Genesis sump pump controller (includes 2, 10' cord length)
• Ion Genesis microprocessor-based technology controls sump pump run times
• Smart Ion digital sump pump switch replaces mechanical sump pump switch
• For both single and duplex sump pump applications
• Ion Genesis will automatically detect how many sump pumps are connected during power-up of the system.
• Can determine if a sump pump malfunctions by trending water levels in sump pit
• Allows user to adjust sump pump turn-on in increments of 1/2” without entering sump pump pit
• Ion Genesis continuously monitors and diagnoses sump pump operation with Ion digital sump pump switch (includes 2)
• Simple installation with no hardwiring or complex programming involved
• Ion Genesis efficiently cycles sump pumps and minimizes pump turn-on cycles
• Allow user to adjust turn-on height with use of controller without entering sump pit (especially useful for radon or sealed pits)
• Can detect a broken or stalled sump pump impeller
• Can detect an obstruction in the sump pump discharge pipe
• Will detect pump failure and if in duplex mode will run the other pump
• Will detect excessive water flow and will determine if it exceeds pump discharge capacity level
• Will alert user to a high-water situation and compensate by overriding the primary sensor and continue to run sump pumps
• Will sound an alarm for any of the above conditions
• Easy to read LCD display keep users informed of vital sump pump operations
• Ion Genesis controller accurately determines the height of the water within the sump pit by acquiring information from the two Ion digital sump pump switches. Ion digital sump pump switch accurately measure the height of the water within the sump pit and digitally transmits the data to Ion Genesis controller.
• The proprietary communications technology embedded in Ion sump pump switch and Ion Genesis controller allows the ability to receive and analyze pumping data never before possible with mechanical sump pump switch control system!

Specifications:

• Voltage: 120 VAC, 60 Hz
• Output (per outlet): 15 Amps (max)
• Pump load(s) max total: 12 Amps
• Remote Alarm Contacts: Normally closed (open during alarm state) 30VAC/DC @ 1 A MAX
• Temperature Range: 0 °C to 40 °C (32 °F to 104 °F)
• Audible Alarm: 80 dB at 10 ft.
• Enclosure: NEMA-1 UL94V-0 ABS
• Mounting Hardware (Controller): (4) #10 screws
• Dimensions are 4.62” Width x 7.62” Height x 2.27” Deep
• Mounting Dimensions (Controller): 8.25” x 3.50”
• Ion Digital Sump Pump Sensor

30ACi Deluxe Step-by-Step Installation Video