Genesis II Sump Pump Controller With Dual BA50M 1/2 HP Pumps (10' Cords) (iNG20418-BA50-10)

Package Includes:

• 2, Ion Technologies BA50M 1/2 HP Sump Pump (10' Power Cords) (HP20162)
• 1, Ion Technologies - Genesis II Pump Controller With 2 Ion Sensors (10' Sensor Cords) (iNG20503)

BA50M 1/2 HP Pump Specifications

• Energy efficient motor (draws only 5.8 amps)
• Carbon ceramic mechanical seal
• Thermal overload protection
• Stainless steel screen prevents debris from entering the pump
• 3 year warranty
• Typical Applications - Basement sump, Dewatering
• Maximum Capacity- Up to 78 GPM
• Maximum Head - Up to 29′
• Electrical Data - 115 V, 1 Ø, 5.8 FLA, 60 Hz
• Motor Data - 1/2 HP, 3450 RPM
• Recommended Minimum Basin Size - 18″ x 24″
• Materials of Construction - Cast iron & stainless steel
• Impeller - Thermoplastic vortex
• Power Cord - 10′
• Discharge Size 2″ NPT Solids Handling ½″

Ion Genesis BA50 Operators Manual

Ion Genesis II Controller

Ion Genesis® is the first-of-a-kind, smart sump pump controller. Sump pump controller comes complete with the Ion digital sump pump switch (2) that continuously monitor critical sump pump information. Ion Genesis has an easy to read LCD display lets you know the status of your sump pump system at a quick glance. Ion Genesis technology replaces your old sump pump controller that uses mechanical sump pump switch. A mechanical sump pump switch will fail due to the wear and tear of sump pump environment.

Ion Genesis II Features

• Programmable sump pump controller keeps user in control of all operations
• Ion digital sump pump switch communicates with the Ion Genesis sump pump controller (includes 2, 10' cord length)
• Ion Genesis microprocessor based technology controls sump pump run times
• Smart Ion digital sump pump switch replaces mechanical sump pump switch
• For both single and duplex sump pump applications
• Ion Genesis Controller Is Intelligent and Simple to Install
• Ion Genesis will automatically detect how many sump pumps are connected during power-up of the system.
• Can determine if a sump pump malfunctions by trending water levels in sump pit
• Allows user to adjust sump pump turn-on in increments of 1/2” without entering sump pump pit
• Ion Genesis continuously monitors and diagnoses sump pump operation with Ion digital sump pump switch (includes 2)
• Simple installation with no hardwiring or complex programming involved
• Ion Genesis efficiently cycles sump pumps and minimizes pump turn-on cycles
• Allow user to adjust turn-on height with use of controller without entering sump pit (especially useful for radon or sealed pits)
• Can detect a broken or stalled sump pump impeller
• Can detect an obstruction in the sump pump discharge pipe
• Will detect pump failure and if in duplex mode will run the other pump
• Will detect excessive water flow and will determine if it exceeds pump discharge capacity level
• Will alert user to a high water situations and compensate by overriding the primary sensor and continue to run pumps
• Will sound an alarm for any of the above conditions
• Easy to read LCD display keep users informed of vital sump pump operations
• Dimensions are 4.62” Width x 7.62” Height x 2.27” Deep

Ion Digital Sump Pump Sensors

• Ion Genesis controller accurately determines the height of the water within the sump pit by acquiring information from the two Ion digital sump pump switches. Ion digital sump pump switch accurately measure the height of the water within the sump pit and digitally transmits the data to Ion Genesis controller. 

• The proprietary communications technology embedded in Ion sump pump switch and Ion Genesis controller allows the ability to receive and analyze pumping data never before possible with mechanical sump pump switch control system!

Ion Genesis Brochure

Ion Genesis Operations Manual

Ion Genesis Installation Video (1.58 and 3.58 minute mark in video)