Sumpro Sump Pump Backup System - 1/2 HP Pumps, Controller and Batteries (iS20281-BA50-10)

Package Includes:

• 1, Ion Sumpro sump pump backup system (iS20281)
• 2, Power+ batteries (P20397)
• 2, Ion BA50M 1/2 HP Sump Pump (10' Power Cords) (HP20162)
• 1, Ion - Genesis II Pump Controller With 2 Ion Sensors (10' Sensor Cords) (iNG20503)

Sumpro Sump Pump Backup System

Features: 

• Smaller footprint & lighter than original Sumpro® with quieter operation
• Easy to read LCD screen for real time monitoring
• Alarm contact for remote monitoring and notification
• Solar & wind inputs for battery charging
• Improved charging circuit
• High inrush capability

Specification:

• Model 100
• A.C. Lower Voltage Limit 98 VAC ± 5V
• Output Voltage with Full Load 85-135V ± 10V
• Maximum Output Current 12 FLA
• Battery Lower Voltage Limit 18.5V ± 0.3V
• Main Output Frequency 60 Hz
• Overload 125 ± 3% (With Auto Reset Function)
• Alarm Contact RJ11 Connection, Normally Closed Dry Contact
• Alternative DC Inputs 24VDC, 20A max 

Sumpro Inverter Brochure
Sumpro Inverter Operation Manual
Sumpro Inverter Troubleshooting Guide

BA50M 1/2 HP Pumps

Specifications

• Energy efficient motor (draws only 5.8 amps)
• Carbon ceramic mechanical seal
• Thermal overload protection
• Stainless steel screen prevents debris from entering the pump
• 3 year warranty
• Typical Applications - Basement sump, Dewatering
• Maximum Capacity- Up to 78 GPM
• Maximum Head - Up to 29′
• Electrical Data - 115 V, 1 Ø, 5.8 FLA, 60 Hz
• Motor Data - 1/2 HP, 3450 RPM
• Recommended Minimum Basin Size - 18″ x 24″
• Materials of Construction - Cast iron & stainless steel
• Impeller - Thermoplastic vortex
• Power Cord - 10′
• Discharge Size 2″ NPT Solids Handling ½″
• Dimensions - 8-3/4 x 5-3/4 x 13-5/8"

Operation Manual

Ion Genesis II Controller

Ion Genesis® is the first-of-a-kind, smart sump pump controller. Sump pump controller comes complete with the Ion digital sump pump switch (2) that continuously monitor critical sump pump information. Ion Genesis has an easy to read LCD display lets you know the status of your sump pump system at a quick glance. Ion Genesis technology replaces your old sump pump controller that uses mechanical sump pump switch. A mechanical sump pump switch will fail due to the wear and tear of sump pump environment.

Features:

• Programmable sump pump controller keeps user in control of all operations
• Ion digital sump pump switch communicates with the Ion Genesis sump pump controller (includes 2, 10' cord length)
• Ion Genesis microprocessor based technology controls sump pump run times
• Smart Ion digital sump pump switch replaces mechanical sump pump switch
• For both single and duplex sump pump applications
• Ion Genesis Controller Is Intelligent and Simple to Install
• Ion Genesis will automatically detect how many sump pumps are connected during power-up of the system.
• Can determine if a sump pump malfunctions by trending water levels in sump pit
• Allows user to adjust sump pump turn-on in increments of 1/2” without entering sump pump pit
• Ion Genesis continuously monitors and diagnoses sump pump operation with Ion digital sump pump switch (includes 2)
• Simple installation with no hardwiring or complex programming involved
• Ion Genesis efficiently cycles sump pumps and minimizes pump turn-on cycles
• Allow user to adjust turn-on height with use of controller without entering sump pit (especially useful for radon or sealed pits)
• Can detect a broken or stalled sump pump impeller
• Can detect an obstruction in the sump pump discharge pipe
• Will detect pump failure and if in duplex mode will run the other pump
• Will detect excessive water flow and will determine if it exceeds pump discharge capacity level
• Will alert user to a high water situations and compensate by overriding the primary sensor and continue to run pumps
• Will sound an alarm for any of the above conditions
• Easy to read LCD display keep users informed of vital sump pump operations
• Dimensions are 4.62” Width x 7.62” Height x 2.27” Deep

Specifications

• Voltage: 120 VAC, 60 Hz
• Output (per outlet): 15 Amps (max)
• Pump load(s) max total: 12 Amps
• Remote Alarm Contacts: Normally closed (open during alarm state) 30 VAC/DC @ 1 A MAX
• Temperature Range: 0 °C to 40 °C (32 °F to 104 °F)
• Audible Alarm: 80 dB at 10 ft.
• Enclosure: NEMA-1 UL94V-0 ABS
• Mounting Hardware (Controller): (4) #10 screws
• Mounting Dimensions (Controller): 8.25” x 3.50”

Ion Digital Sump Pump Sensors

• Ion Genesis controller accurately determines the height of the water within the sump pit by acquiring information from the two Ion digital sump pump switches. Ion digital sump pump switch accurately measure the height of the water within the sump pit and digitally transmits the data to Ion Genesis controller. 
• The proprietary communications technology embedded in Ion sump pump switch and Ion Genesis controller allows the ability to receive and analyze pumping data never before possible with mechanical sump pump switch control system!

Ion Genesis Brochure
Ion Genesis Operations Manual