35ACi Power Pac System (MPK20478)
Ion Backup Systems
$2,565.34
$3,455.00
(You save
$889.66
)
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 2 - 5 and get 5% off
- Buy 6 - 10 and get 10% off
- Buy 11 or above and get 15% off
Sump Pump Package Features:
- Powerful dual 1/3 HP sump pumps
- Fully automatic battery backup
- Sump pumps run on AC or DC power
- Ion Digital Level Sensors
- Set sump pump water levels up to 72"
MPPIII 1-3 HP Sump Pump Power Pac System
- This backup system for sump pump runs on AC or DC power
- (2) ⅓ HP pumps with PSC motor
- Recommended minimum basin size: 18 x 24"
- Includes Ion Genesis® controller, 1½" check valve and 1½" Sch. 40 PVC piping
- Every cycle alternates to the other pump
- Low amp draw pumps 4.5 amps
- Each pump rated up to 3180 GPH
- Factory built; easy and quick to install
- Built-in alarm system
- Thermal overload protection
- Energy efficient motor
- Carbon ceramic mechanical seal
- Stainless steel screen prevents debris from entering the pump
- 3 year warranty
Documents:
- 35ACi Power Pac System Brochure
- AC35 Product Brochure
- Ion Genesis Brochure
- Ion Genesis Owners Manual
- 35ACi Power Pac BA Series Sump Pump Operation Manual
System Specifications
- Maximum Capacity Up to 68 GPM Maximum Head Up to 25′
- Electrical Data 115 V, 1 Ø, 4.5 FLA, 60 Hz
- Motor Data ⅓ HP, 3450 RPM
- Recommended Minimum Basin Size 18″ x 24″
- Materials of Construction Cast iron & stainless steel Impeller
- Thermoplastic vortex Power Cord 10′
- Standard Discharge Size 1½″ NPT
- Solids Handling ½″
Ion Technologies 35AC Battery Backup Inverter
MPPIII Sump Pump Power Pac System:
- Fully automatic auxiliary power source
- Backup system runs on AC or DC power
- Runs the same ⅓ HP pumps during a power outage
System Specifications
- Fully automatic, converts 12 volt DC to 120 volt AC when power is lost
- Runs ⅓ HP pump on AC or DC power
- Inverter has digital display, tells status of system at all times
- Uses one, 12-volt deep cycle AGM batteries for extended run time (batteries are NOT included)
- Non-corrosive battery enclosure
- Quick and easy installation
- 3 year warranty
Ion Genesis® II Pump Controller
- Featuring Ion® digital level sensors
- First of its kind solid-state sensing technology with no moving parts
- Multipoint sealing mechanism that supersedes single surface seals
- Rated at 2 million cycles, it will last 4 times longer than a standard pump switch
- Voltage: 120 VAC, 60 Hz
- Output Capacity (per outlet): ½ HP, 12 FLA, 15 amp max, 72 LRA
- Remote Alarm Contacts: Normally closed (open during alarm state) 30 V/DC @ 1 amp max
- Temperature Range: 32º F to 104º F (0º C to 40º C)
- Audible Alarm: 80 dB @ 10 ft.
- Enclosure: NEMA-1 UL94V-0 ABS
- Mounting Hardware (controller): (4) #10 Screws (not included)
- Mounting Dimensions (controller): 8.25" X 3.5"
- 3 year warranty