MPPIII 1-3 HP Sump Pump Power Pac System with Battery and Stand

System Includes:

• MPPIII 1-3 HP Sump Pump Power Pac System (2 pumps, controller, inverter, and pre-piped)
• 1, Power Plus battery
• 1, Battery box stand

BA33M 1/3 HP Sump Pump

Features:

• (2) ⅓ HP pumps with PSC motor
• Recommended minimum basin size: 18 x 24"
• Includes Ion Genesis® controller, 1½" check valve and 1½" Sch. 40 PVC piping
• Every cycle alternates to the other pump
• Low amp draw pumps 4.5 amps
• Each pump rated up to 3180 GPH
• Factory built; easy and quick to install
• Built-in alarm system
• Thermal overload protection
• Energy efficient motor
• Carbon ceramic mechanical seal
• Stainless steel screen prevents debris from entering the pump
• 3 year warranty

System Specifications

• Maximum Capacity Up to 68 GPM Maximum Head Up to 25′
• Electrical Data 115 V, 1 Ø, 4.5 FLA, 60 Hz
• Motor Data ⅓ HP, 3450 RPM
• Recommended Minimum Basin Size 18″ x 24″
• Materials of Construction Cast iron & stainless steel Impeller
• Thermoplastic vortex Power Cord 10′
• Standard Discharge Size 1½″ NPT
• Solids Handling ½″

Ion Technologies 35ACi Battery Backup Inverter

Features:

• Fully automatic, converts 12 volt DC to 120 volt AC when power is lost
• Runs ⅓ HP pump on AC or DC power
• Inverter has digital display, tells status of system at all times
• Uses one, Power Plus 12 volt deep cycle AGM battery. (battery included)
• Non-corrosive battery enclosure
• Quick and easy installation
• 3 year warranty (1 year on Genesis controller)

Specifications:

• Mains A.C. Lower Voltage Limit - 90 VAC ± 5V
• Output Voltage with Full Load -  110 - 120V ± 10 V
• Maximum Output Power - 5.5 FLA
• Battery Lower Voltage Limit - 10.5 VDC ± 0.2 V
• Output Frequency Main Output Frequency: Same as Input
• DC Input - 12 VDC
• Battery Charger Boost Voltage - 13.7 ± 0.2 V
• Overload - 130% ± 3% (With Auto Reset Function)

35ACi Power Pac System Brochure
AC35 Product Brochure

Ion Genesis® II Sump Pump Controller

Features:

• Ion® digital level sensors
• First of its kind solid-state sensing technology with no moving parts
• Multipoint sealing mechanism that supersedes single surface seals
• Rated at 2 million cycles, it will last 4 times longer than a standard pump switch
• Voltage: 120 VAC, 60 Hz
• Output Capacity (per outlet): ½ HP, 12 FLA, 15 amp max, 72 LRA
• Remote Alarm Contacts: Normally closed (open during alarm state) 30 V/DC @ 1 amp max
• Temperature Range: 32º F to 104º F (0º C to 40º C)
• Audible Alarm: 80 dB @ 10 ft.
• Enclosure: NEMA-1 UL94V-0 ABS
• Mounting Hardware (controller): (4) #10 Screws (not included)
• Mounting Dimensions (controller): 8.25" X 3.5"
• 3 year warranty

Specifications:

• Voltage: 120 VAC, 60 Hz
• Output (per outlet): 15 Amps (max)
• Pump load(s) max: total - 12 Amps
• Remote Alarm Contacts: Normally closed (open during alarm state) 30 VAC/DC @ 1 A MAX
• Temperature Range: 0 °C to 40 °C (32 °F to 104 °F)
• Audible Alarm: 80 dB at 10 ft.
• Enclosure: NEMA-1 UL94V-0 ABS
• Mounting Hardware (Controller): (4) #10 screws
• Mounting Dimensions (Controller): 8.25” x 3.50”

Ion Genesis Brochure
Ion Genesis Owners Manual