MPPIII Sump Pump Power Pac System With 35ACi Backup Inverter (MPK20478)

MPPIII 35ACi Power Pac System (MPK20478)

Ion Backup Systems
SKU:
MPK20478
$2,409.86
$3,455.00
(You save $1,045.14 )
Bulk Pricing:

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 2 - 5 and get 5% off
  • Buy 6 - 10 and get 10% off
  • Buy 11 or above and get 15% off

Sump Pump Package Features:

- Powerful dual 1/3 HP sump pumps

- Fully automatic battery backup

- Sump pumps run on AC or DC power

- Ion Digital Level Sensors

- Set sump pump water levels up to 72"

 

Weight:
70.00 LBS
Current Stock:
Adding to cart… The item has been added
Description

MPPIII 1-3 HP Sump Pump Power Pac System

  • This backup system for sump pump runs on AC or DC power
  • (2) ⅓ HP pumps with PSC motor
  • Recommended minimum basin size: 18 x 24"
  • Includes Ion Genesis® controller, 1½" check valve and 1½" Sch. 40 PVC piping
  • Every cycle alternates to the other pump
  • Low amp draw pumps 4.5 amps
  • Each pump rated up to 3180 GPH
  • Factory built; easy and quick to install
  • Built-in alarm system
  • Thermal overload protection
  • Energy efficient motor
  • Carbon ceramic mechanical seal
  • Stainless steel screen prevents debris from entering the pump
  • 3 year warranty

Documents:

System Specifications

  • Maximum Capacity Up to 68 GPM Maximum Head Up to 25′
  • Electrical Data 115 V, 1 Ø, 4.5 FLA, 60 Hz
  • Motor Data ⅓ HP, 3450 RPM
  • Recommended Minimum Basin Size 18″ x 24″
  • Materials of Construction Cast iron & stainless steel Impeller
  • Thermoplastic vortex Power Cord 10′
  • Standard Discharge Size 1½″ NPT
  • Solids Handling ½″

Ion Technologies 35AC Battery Backup Inverter

MPPIII Sump Pump Power Pac System: 

  • Fully automatic auxiliary power source
  • Backup system runs on AC or DC power
  • Runs the same ⅓ HP pumps during a power outage

System Specifications

  • Fully automatic, converts 12 volt DC to 120 volt AC when power is lost
  • Runs ⅓ HP pump on AC or DC power
  • Inverter has digital display, tells status of system at all times
  • Uses one, 12-volt deep cycle AGM batteries for extended run time (batteries are NOT included)
  • Non-corrosive battery enclosure
  • Quick and easy installation
  • 3 year warranty

Ion Genesis® II Pump Controller

  • Featuring Ion® digital level sensors
  • First of its kind solid-state sensing technology with no moving parts
  • Multipoint sealing mechanism that supersedes single surface seals
  • Rated at 2 million cycles, it will last 4 times longer than a standard pump switch
  • Voltage: 120 VAC, 60 Hz
  • Output Capacity (per outlet): ½ HP, 12 FLA, 15 amp max, 72 LRA
  • Remote Alarm Contacts: Normally closed (open during alarm state) 30 V/DC @ 1 amp max
  • Temperature Range: 32º F to 104º F (0º C to 40º C)
  • Audible Alarm: 80 dB @ 10 ft.
  • Enclosure: NEMA-1 UL94V-0 ABS
  • Mounting Hardware (controller): (4) #10 Screws (not included)
  • Mounting Dimensions (controller): 8.25" X 3.5"
  • 3 year warranty
Related Products